Day 13 5/13/19

Today was a very successful day in the forge! I completed the four support legs of my garden sculpture. To do this I cut four bars of steel to be two feet in length. I heated the middle of each bar enough to bend in a vice and then bent one end in the opposite direction, creating a zig-zag shape. The second bend is a smaller length so I tapered that into a wedge to fit to the side of the hanger. The other, longer end was tapered into a point to stick into the ground. All four legs are the same and have been welded onto the base of the sculpture. This stands about seven feet tall out of the ground.













I also spent a little time in the ceramics studio to trim and smooth my flower pots for this project.











Today's hours: 5 1/2

Total hours: 42

Comments

  1. SueMay 16, 2019 at 5:30 AM

    Wow, what a cool idea! Looking forward to seeing it all completed :)

    ReplyDelete

Post a Comment

Popular posts from this blog

First weekly recap!

5/5/19 Quite a lot happened this week pertaining to my senior project. The first major “surprise” was breaking my ankle the weekend before. I thought I’d still be able to get by in martial arts but was quickly proven wrong. I made an important decision to return to classes for the remaining three weeks of the year (not a very fantastic way to end a four year proctor career) instead of breaking my bones any further. The next big surprise came the day after, when in the afternoon following a full class day, my kayak coach suggested simply doing a different senior project. I thought that would be impossible because of all the paperwork involved but all I needed to do was ask about it. It turned out to be very possible because I just enjoyed a week of metal sculpture and ceramics! So much is open ended surrounding my project that it feels very relaxed. All I really have to do is make any form of metal or ceramic pieces, although I have my own ambitious goals to keep my
Read more

Day 8

Image
5/8/19 Today began with about a half hour of ceramics. I used this time mainly to glaze some previously fired sculptures. The majority of my day was spent in the forge. From the morning, through lunch, until classes ended I was working on my first major collaborative piece! I am constructing a garden sculpture designed to hang three suspended ceramic flower pots from large steel hooks.   I began with a long metal pole about 8 feet in length. I heated the metal just before then end and bent it around a large steel horn to get the desired curve (this is the large one seen in the third photo). Then, I heated the end of that curve and hammered it around an anvil horn to get the smaller curve. This created a nice base pole with a hook already attached, standing at about 6 feet tall. I created two more hooks identical in size, but on smaller poles. I am currently in between the process of hammering out the straight ends of the hooks and welding them onto the original 6 foot pole. I w
Read more

Weekly blog 3

5/19/19 Throughout this week I have achieved a lot. I might even say the most progress was made in these past 5 work days. While my work days have been decreasing in length, the value of what I accomplish on campus increases everyday. After learning the process of bees waxing steel sculptures, I was able to finalize many of my metal pieces including a stool I made between the fall and spring terms. I was able to put that stool in the Proctor art show which I was happy about. I am also very happy to have finalized my flower pots and kayak sculpture. The garden sculpture will be left un-bees waxed so it can get a unique rusted, weathered look. Unfortunately, this week’s surprises were not the good kind as the ceramic pots I made for that same sculpture were damaged in the kiln along with a vase I threw. This is not an enormous concern though because I still consider the garden sculpture a great success. I am preparing to finish my second major project along with a little desk lamp ov
Read more